Broadcast Tools STAIII-PLUS
Telos HX2
Features
• Advanced hybrid algorithms |
The Telos Hx2 represents the highest state-of-the-art in hybrid performance, with Telos processing technologies that take the POTS hybrid to a new level of consistently superior performance, regardless of telephone line characteristics.
Inside the dual-hybrid Hx2, you'll find advanced hybrid technology with new features that significantly sweeten and control caller audio. It comes standard with Auto-Answer, caller disconnect detection, sophisticated new audio-leveling and anti-feedback routines for enhanced open-speaker applications, call screening and line-hold features, front-panel send and receive audio metering, plus much more. This version offers AES3 I/O.
| Processing Functions | ||
|---|---|---|
| General: |
|
|
| Send (to caller Processing: |
|
|
| Receive (from caller) Processing: |
|
|
Analog Inputs |
|
|---|---|
| Send Analog Inputs: |
|
| Connector: | XLR Female, Pin 2 High (Active Balanced with RF Protection) |
| Input Range: | Select between MIC and LINE levels |
| Input Level: | Adjustable from -10 to +4 dBu (nominal) |
| Impedance: | Bridging, > 50K Ohms |
| Analog Clip Point: | +21 dBu |
| Analog-to-Digital Converter Resolution: | 20 bits |
Analog Outputs |
|
|---|---|
| Receive Analog Outputs: |
|
| Connector: | XLR Male, Pin 3 High |
| Output Level: | Nominal at +4 dBu |
| Impedance: | <50 ohms |
| Digital-to-Analog Converter Resolution: | 24 bits |
| Headroom Before Clipping: | 20 dB headroom from 4dBU nominal levels |
AES Digital Input / Output (Optional) |
|
|---|---|
| Overview: | Plug-in module converts the XLR inputs and outputs to AES3. |
| Rate Conversion: | Sample Rate Converters on all inputs and outputs. Inputs can accept 32, 44.1, and 48kHz rates. Clock for outputs may be sourced from the AES inputs or internally-generated 48 KHz. |
| Input Level: | Nominal at -20 dBFs |
| Output Level: | Nominal at -20 dBFs |
Audio Performance |
|
|---|---|
| Frequency Response: | 200 to 3400 Hz, +/- 1 dB |
| THD+N/Input: | < 0.5% THD+N using 1 KHz sinewave |
| Signal to Noise: | >90 dB |
Control Ports |
|
|---|---|
| General purpose Input/Output: | Single 9 pin D-Sub connector with 2 status outputs (Ringing and ON-AIR) and 2 control inputs (ON and OFF) per hybrid |












































