Linear Acoustic AERO.100



Features

  • Compact, space-efficient 1RU loudness management platform
     
  • Capable of hosting one or two AEROMAX® processing instances in AMX5.1, AMX2.0 or AMX5x2 configurations
  • UPMAX®-II upmixing/downmixing with automatic detection and automatic downmix replacement
  • Advanced ITU limiter to ensure compliance with the strictest loudness regulations
  • Local audio insertion/replacement for EAS and local emergency audio
  • Available Dolby® Digital/Dolby Digital Plus transcoding
  • Available Nielsen® watermark encoding including N2, N6, and CBET
  • Supports 8 audio pairs via SDI I/O with SDI video delay



Linear Acoustic® AERO.100 is a 1RU loudness management platform capable of hosting one or two AEROMAX® processing instances (at least one is required) providing real time adaptive wideband and/or multiband processing including an advanced ITU limiter. Output levels are consistent and compliant without compromising audio quality.

Our Hollywood-approved UPMAX®-II upmixing/downmixing algorithm creates engaging 5.1-channel audio from 2-channel sources and provides a downmix that is nearly indistinguishable from the original source.

Available configurations for each instance include AMX5.1 (one 5.1 channel and two 2-channel processing engines), AMX2.0 (three 2-channel processing engines, one with 5.1-channel downmixing) and AMX5x2 (five 2-channel processing engines). Flexible signal routing is provided for main and secondary audio programs plus EAS and local emergency audio insertion.

The first processing engine of any AMX instance can be optionally configured to include Dolby® Digital/Dolby Digital Plus transcoding. This provides decoding of Dolby Digital/Dolby Digital Plus content to PCM for loudness processing and encoding to Dolby Digital/Dolby Digital Plus for transmission. Nielsen® watermark encoding is also optionally available including N2, N6, and CBET.

Designed and built in the USA, the AERO.100 platform itself supports 8 audio pairs via SDI I/O with SDI video delay and 4 pairs via AES. Failover bypass relays maintain signal continuity and dual auto-ranging power supplies enable redundancy and worldwide compatibility.

The included NfRemote software provides comprehensive control over system settings and processing parameters remotely from any PC including access to the built-in http server for automated control or retrieval of loudness logs.

 

AERO.100 SPECIFICATIONS

Processing

  • One or two instances of AEROMAX® real time adaptive wideband and/or multiband processing including an advanced ITU limiter (at least one instance required)
     
  • UPMAX®-II 2-channel to 5.1-channel upmixing/downmixing with automatic detection and automatic downmix replacement

 

Audio Encoding/Decoding

  • Available Dolby® Digital/Dolby Digital Plus transcoding
     
  • Available Nielsen® watermark encoding including N2, N6, and CBET

 

Reference

  • 48kHz via AES DARS (or any AES signal applied to the Ref In connector), AES In 1, SDI, or from the internal 48kHz clock (standalone use only)

 

Sample Rate/Resolution/Frequency Response

  • 48kHz, 24-bit, 20Hz to 20kHz below threshold

 

AES I/O

  • Eight main inputs plus reference via 75-Ohm BNC female connectors. Eight main outputs plus encoder output. All digital inputs are 75 Ohm internally terminated, unbalanced. Signal levels per SMPTE
    276M/ AES-3ID-2001

 

HD/SD-SDI I/O

  • Auto-sensing HD/SD-SDI (SMPTE 292M/259M) inputs, up to 1080i/60/59.94/50Hz. De-embed up to 16 channels from applied SDI signal, process and/or encode, re-embed up to 16 channels. Supports SMPTE 2020 A and B VANC metadata

     

Parallel GPI/O Control Port

  • 25-pin female D connector, 0-5V TTL levels for 8 inputs and 8 outputs; controls simple preset recalls plus voiceover/EAS insertion

     

Serial Metadata Input

  • 9-pin female D connector; 115.2 kbps; pinout per SMPTE 207M (RS-485); Designed to directly interface with Dolby serial metadata (SMPTE RDD6)

     

Ethernet

  • Gigabit Ethernet via RJ45 supports included TCP/IP remote control application; HTTP server included for get/set control of all parameters

 

Remote Control

  • Windows®-compatible TCP/IP remote control Included application for full setup and control, ITU-R BS.1770 metering for all programs, encoder statistics, and return audio for remote monitoring (network speed permitting). HTTP server allows get/set control from PC

 

Front Panel Controls and Indicators

  • Graphical OLED display

 

Power Requirements

  • Dual power supplies, each rated at 100-264 VAC, 50/60Hz, auto-sensing, 150W max. total

 

Dimensions and Weight

  • 1RU - 1.75”H x 19”W x 15.5”D (44 x 483 x 394 mm)

  • Net weight: 9 lbs. (4 kg), approximate.

 

Shipping Dimensions and Weight

  • 22”W x 20”D x 7”H (559 x 508 x 178 mm)

  • Net weight: 15 lbs. (6.80 kg), approximate.


Environmental

  • Fan cooled. Operating: 0 to 50 degrees C, non-operating -20 to 70 degrees C